Litepanels 1×1 LED 3200K/5600K Bi-Color Light Flood ,

  • Dial-up variable color
  • Dial-up brightness
  • Only 1’x1′ square and just 1.75″ thick
  • Ultra-lightweight
  • Cool to the touch

The Litepanels 1×1 Bi-Color has two groups of LEDs (Light Emitting Diodes) set in the one-foot by one-foot square fixture: one group of emitters is comprised of Litepanels proprietary 3200°K LEDs, one of 5600°K LEDs. The fixture is therefore able to supply either tungsten or daylight balanced light and can also provide any color temperature between tungsten or daylight by simply cross-fading between the two groups of LEDs. The Bi-Color also offers a master dimmer dial that provides intuitive dimming control with no noticeable color shift. Color temperature is also controlled through a separate dial. Both dimming and color temperature can also be controlled via the new integrated DMX feature. To further expand the 1×1 Bi-Color’s flexibility, the fixtures can vary the mix between tungsten and daylight LEDs to set the resulting color temperature to any point between 3200°K and 5600°K. Color temperature can be dialed in by using either the onboard dial or digital color temperature settings, or via a DMX lighting controller. Thus the Bi-Color user can make quick adjustments to match unusual mixes of color temperature, or to enhance skin tones. 1×1 Bi-Color LED fixtures feature Litepanels’ fullrange integrated dimmer that enables instant dimming from 0 to 100 percent with minimum shift in color. It provides the same low power requirements, less than 10 percent of the electricity needed to power standard lighting fixtures. Because Litepanels fixtures generate pr


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s